dmesg - Intel Xeon E5-1650 v3
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-25-generic (buildd@lgw01-20) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #26~14.04.1-Ubuntu SMP Fri Jul 24 21:16:20 UTC 2015 (Ubuntu 3.19.0-25.26~14.04.1-generic 3.19.8-ckt2)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable
BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000078f5cfff] usable
BIOS-e820: [mem 0x0000000078f5d000-0x0000000079866fff] reserved
BIOS-e820: [mem 0x0000000079867000-0x0000000079d4cfff] ACPI NVS
BIOS-e820: [mem 0x0000000079d4d000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000207fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0 present.
DMI: Supermicro SYS-5018R-MR/X10SRi-F, BIOS 2.0 12/17/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x2080000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 380000000000 mask 3FC000000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: last_pfn = 0x78f5d max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd970-0x000fd97f] mapped at [ffff8800000fd970]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000094000] 94000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0x207fe00000-0x207fffffff]
[mem 0x207fe00000-0x207fffffff] page 1G
init_memory_mapping: [mem 0x2060000000-0x207fdfffff]
[mem 0x2060000000-0x207fdfffff] page 1G
init_memory_mapping: [mem 0x2000000000-0x205fffffff]
[mem 0x2000000000-0x205fffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x78f5cfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x78dfffff] page 2M
[mem 0x78e00000-0x78f5cfff] page 4k
init_memory_mapping: [mem 0x100000000-0x1fffffffff]
[mem 0x100000000-0x1fffffffff] page 1G
RAMDISK: [mem 0x359ee000-0x36ceefff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM)
ACPI: XSDT 0x00000000798B3098 0000B4 (v01 01072009 AMI 00010013)
ACPI: FACP 0x00000000798E3D08 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: DSDT 0x00000000798B31E8 030B1F (v02 SUPERM SMCI--MB 01072009 INTL 20091013)
ACPI: FACS 0x0000000079D4BF80 000040
ACPI: APIC 0x00000000798E3E18 000100 (v03 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: FPDT 0x00000000798E3F18 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: FIDT 0x00000000798E3F60 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: SPMI 0x00000000798E4000 000040 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000)
ACPI: MCFG 0x00000000798E4040 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097)
ACPI: UEFI 0x00000000798E4080 000042 (v01 SUPERM SMCI--MB 01072009 00000000)
ACPI: HPET 0x00000000798E40C8 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: WDDT 0x00000000798E4100 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013)
ACPI: SSDT 0x00000000798E4140 01717F (v02 SUPERM PmMgt 00000001 INTL 20120913)
ACPI: SSDT 0x00000000798FB2C0 00264C (v02 SUPERM SpsNm 00000002 INTL 20120913)
ACPI: SSDT 0x00000000798FD910 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913)
ACPI: PRAD 0x00000000798FD978 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913)
ACPI: DMAR 0x00000000798FDA80 0000C4 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: HEST 0x00000000798FDB48 00027C (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: BERT 0x00000000798FDDC8 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: ERST 0x00000000798FDDF8 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: EINJ 0x00000000798FE028 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000207fffffff]
NODE_DATA(0) allocated [mem 0x207fff9000-0x207fffdfff]
[ffffea0000000000-ffffea0081ffffff] PMD -> [ffff881fff600000-ffff88207f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x207fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00099fff]
node 0: [mem 0x00100000-0x78f5cfff]
node 0: [mem 0x100000000-0x207fffffff]
Initmem setup node 0 [mem 0x00001000-0x207fffffff]
On node 0 totalpages: 33525494
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3993 pages, LIFO batch:0
DMA32 zone: 7678 pages used for memmap
DMA32 zone: 491357 pages, LIFO batch:31
Normal zone: 516096 pages used for memmap
Normal zone: 33030144 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x78f5d000-0x79866fff]
PM: Registered nosave memory: [mem 0x79867000-0x79d4cfff]
PM: Registered nosave memory: [mem 0x79d4d000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:12 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88207fc00000 s86144 r8192 d32640 u131072
pcpu-alloc: s86144 r8192 d32640 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
Built 1 zonelists in Node order, mobility grouping on. Total pages: 33001635
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 131901176K/134101976K available (7918K kernel code, 1172K rwdata, 3752K rodata, 1408K init, 1292K bss, 2200800K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
NR_IRQS:16640 nr_irqs:928 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-11.
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3500.235 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.47 BogoMIPS (lpj=14000940)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Mount-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mountpoint-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
ftrace: allocating 29988 entries in 118 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000fbffc000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de
dmar: RMRR base: 0x0000007ba77000 end: 0x0000007ba86fff
dmar: ATSR flags: 0x0
dmar: RHSA base: 0x000000fbffc000 proximity domain: 0x0
IOAPIC id 1 under DRHD base 0xfbffc000 IOMMU 0
IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0
HPET id 0 under DRHD base 0xfbffc000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-1650 v3 @ 3.50GHz (fam: 06, model: 3f, stepping: 02)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11
x86: Booted up 1 node, 12 CPUs
smpboot: Total of 12 processors activated (84005.64 BogoMIPS)
devtmpfs: initialized
Using 2GB memory block size for large-memory system
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x79867000-0x79d4cfff] (5136384 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 16:58:45, date: 02/08/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: PRAD 0x0000000000000000 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20141107/hwxface-580)
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Enabling Firmware First mode for corrected errors.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: platform does not support [AER]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:2fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:2fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.3: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xfedb0000-0xfedb000f]
pci_bus 0000:00: root bus resource [mem 0xfedc0000-0xfedc000f]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:03.2: [8086:2f0a] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: System wakeup disabled by ACPI
pci 0000:00:03.3: [8086:2f0b] type 01 class 0x060400
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: System wakeup disabled by ACPI
pci 0000:00:04.0: [8086:2f20] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [mem 0xfb22c000-0xfb22ffff 64bit]
pci 0000:00:04.1: [8086:2f21] type 00 class 0x088000
pci 0000:00:04.1: reg 0x10: [mem 0xfb228000-0xfb22bfff 64bit]
pci 0000:00:04.2: [8086:2f22] type 00 class 0x088000
pci 0000:00:04.2: reg 0x10: [mem 0xfb224000-0xfb227fff 64bit]
pci 0000:00:04.3: [8086:2f23] type 00 class 0x088000
pci 0000:00:04.3: reg 0x10: [mem 0xfb220000-0xfb223fff 64bit]
pci 0000:00:04.4: [8086:2f24] type 00 class 0x088000
pci 0000:00:04.4: reg 0x10: [mem 0xfb21c000-0xfb21ffff 64bit]
pci 0000:00:04.5: [8086:2f25] type 00 class 0x088000
pci 0000:00:04.5: reg 0x10: [mem 0xfb218000-0xfb21bfff 64bit]
pci 0000:00:04.6: [8086:2f26] type 00 class 0x088000
pci 0000:00:04.6: reg 0x10: [mem 0xfb214000-0xfb217fff 64bit]
pci 0000:00:04.7: [8086:2f27] type 00 class 0x088000
pci 0000:00:04.7: reg 0x10: [mem 0xfb210000-0xfb213fff 64bit]
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb238000-0xfb238fff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfb200000-0xfb20ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb237000-0xfb23700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xfb236000-0xfb23600f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb234000-0xfb2343ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:8d1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb233000-0xfb2333ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037]
pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb232000-0xfb2327ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb231000-0xfb2310ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.2: PCI bridge to [bus 03]
pci 0000:04:00.0: [8086:1521] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xfb120000-0xfb13ffff]
pci 0000:04:00.0: reg 0x18: [io 0xe020-0xe03f]
pci 0000:04:00.0: reg 0x1c: [mem 0xfb144000-0xfb147fff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.1: [8086:1521] type 00 class 0x020000
pci 0000:04:00.1: reg 0x10: [mem 0xfb100000-0xfb11ffff]
pci 0000:04:00.1: reg 0x18: [io 0xe000-0xe01f]
pci 0000:04:00.1: reg 0x1c: [mem 0xfb140000-0xfb143fff]
pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:00:03.3: PCI bridge to [bus 04]
pci 0000:00:03.3: bridge window [io 0xe000-0xefff]
pci 0000:00:03.3: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [1a03:1150] type 01 class 0x060400
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 06-07]
pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.6: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:07:00.0: [1a03:2000] type 00 class 0x030000
pci 0000:07:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:07:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff]
pci 0000:07:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:06:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:06:00.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:07:00.0
vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:07:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
e820: reserve RAM buffer [mem 0x78f5d000-0x7bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0400-0x047f] could not be reserved
system 00:01: [io 0x0580-0x059f] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [io 0x0880-0x0883] has been reserved
system 00:01: [io 0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0a00-0x0a0f] has been reserved
system 00:02: [io 0x0a10-0x0a1f] has been reserved
system 00:02: [io 0x0a20-0x0a2f] has been reserved
system 00:02: [io 0x0a30-0x0a3f] has been reserved
system 00:02: [io 0x0a40-0x0a4f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: Plug and Play ACPI device, IDs IPI0001 (active)
pnp: PnP ACPI: found 6 devices
pci_bus 0000:00: max bus depth: 2 pci_try_num: 3
pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:00:03.3: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref]
pci 0000:00:1c.0: BAR 14: assigned [mem 0x90100000-0x902fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x90300000-0x904fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.2: PCI bridge to [bus 03]
pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref]
pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref]
pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref]
pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref]
pci 0000:00:03.3: PCI bridge to [bus 04]
pci 0000:00:03.3: bridge window [io 0xe000-0xefff]
pci 0000:00:03.3: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:03.3: bridge window [mem 0x90000000-0x900fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x90100000-0x902fffff]
pci 0000:00:1c.0: bridge window [mem 0x90300000-0x904fffff 64bit pref]
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:06:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:06:00.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:1c.6: PCI bridge to [bus 06-07]
pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.6: bridge window [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x1000-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xfedb0000-0xfedb000f]
pci_bus 0000:00: resource 8 [mem 0xfedc0000-0xfedc000f]
pci_bus 0000:00: resource 9 [mem 0x90000000-0xfbffbfff]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:04: resource 2 [mem 0x90000000-0x900fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:05: resource 1 [mem 0x90100000-0x902fffff]
pci_bus 0000:05: resource 2 [mem 0x90300000-0x904fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:07: resource 1 [mem 0xfa000000-0xfb0fffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 65536 (order: 9, 2097152 bytes)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
NET: Registered protocol family 1
PCI: CLS mismatch (64 != 32), using 64 bytes
pci 0000:07:00.0: Video device with shadowed ROM
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19460K (ffff8800359ee000 - ffff880036cef000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x74f5d000-0x78f5d000] (64MB) mapped at [ffff880074f5d000-ffff880078f5cfff]
microcode: CPU0 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU1 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU2 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU3 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU4 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU5 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU6 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU7 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU8 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU9 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU10 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU11 sig=0x306f2, pf=0x1, revision=0x36
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 4096 (order: 6, 262144 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1454950725.620:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.2: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.3: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xfa000000, mapped to 0xffffc9001ce80000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-25-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-25-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb234000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.0-25-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb233000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.19.0-25-generic ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
usb 1-12: new high-speed USB device number 2 using xhci_hcd
usb 1-12: New USB device found, idVendor=0557, idProduct=7000
usb 1-12: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-12:1.0: USB hub found
hub 1-12:1.0: 4 ports detected
usb 1-12.1: new low-speed USB device number 3 using xhci_hcd
tsc: Refined TSC clocksource calibration: 3499.997 MHz
usb 1-12.1: New USB device found, idVendor=0557, idProduct=2419
usb 1-12.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-12.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-12.1: ep 0x82 - rounding interval to 32 microframes, ep desc says 40 microframes
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
usb 3-1: New USB device found, idVendor=8087, idProduct=800a
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
usb 4-1: New USB device found, idVendor=8087, idProduct=8002
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 6aaa11d18c2d3a40b1b4dbe5bf8ad656ddf51838'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 4:714:994
machinecheck machinecheck7: hash matches
memory memory37: hash matches
rtc_cmos 00:00: setting system clock to 2016-02-08 16:58:47 UTC (1454950727)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
Freeing unused kernel memory: 344K (ffff880001baa000 - ffff880001c00000)
systemd-udevd[180]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
hidraw: raw HID events driver (C) Jiri Kosina
PTP clock support registered
dca service started, version 1.12.1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
igb: Copyright (c) 2007-2014 Intel Corporation.
input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12.1/1-12.1:1.0/0003:0557:2419.0001/input/input2
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfb232000 port 0xfb232100 irq 32
ata2: SATA max UDMA/133 abar m2048@0xfb232000 port 0xfb232180 irq 32
ata3: SATA max UDMA/133 abar m2048@0xfb232000 port 0xfb232200 irq 32
ata4: SATA max UDMA/133 abar m2048@0xfb232000 port 0xfb232280 irq 32
hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-12.1/input0
input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12.1/1-12.1:1.1/0003:0557:2419.0002/input/input3
hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-12.1/input1
ata5: SATA max UDMA/133 abar m2048@0xfb232000 port 0xfb232300 irq 32
ata6: SATA max UDMA/133 abar m2048@0xfb232000 port 0xfb232380 irq 32
igb 0000:04:00.0: added PHC on eth0
igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:a8:b6:0e
igb 0000:04:00.0: eth0: PBA No: 050B00-000
igb 0000:04:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
Switched to clocksource tsc
igb 0000:04:00.1: added PHC on eth1
igb 0000:04:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:a8:b6:0f
igb 0000:04:00.1: eth1: PBA No: 050B00-000
igb 0000:04:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:04:00.1 em2: renamed from eth1
igb 0000:04:00.0 em1: renamed from eth0
systemd-udevd[186]: renamed network interface eth1 to em2
systemd-udevd[185]: renamed network interface eth0 to em1
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: ATA-9: Samsung SSD 850 PRO 512GB, EXM02B6Q, max UDMA/133
ata1.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): orphan cleanup on readonly fs
EXT4-fs (sda1): 2 orphan inodes deleted
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 20 bits of entropy available
init: plymouth-upstart-bridge main process (277) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (287) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-udevd[531]: starting version 204
lp: driver loaded but no devices found
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:05: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
power_meter ACPI000D:00: Found ACPI power meter.
power_meter ACPI000D:00: Ignoring unsafe software power cap!
wmi: Mapper loaded
ioatdma: Intel(R) QuickData Technology Driver 4.00
igb 0000:04:00.0: DCA enabled
igb 0000:04:00.1: DCA enabled
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6c
EDAC sbridge: Seeking for: PCI ID 8086:2f6d
EDAC MC0: Giving out device to module sbridge_edac.c controller Haswell Socket#0: DEV 0000:ff:12.0 (POLLED)
EDAC sbridge: Ver: 1.1.0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
[drm] Initialized drm 1.1.0 20060810
[drm] AST 2400 detected
[drm] Analog VGA only
[drm] dram 1632000000 1 16 01000000
[TTM] Zone kernel: Available graphics memory: 65961340 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
checking generic (fa000000 130000) vs hw (fa000000 1000000)
fb: switching to astdrmfb from VESA VGA
Console: switching to colour dummy device 80x25
fbcon: astdrmfb (fb0) is primary device
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain dram
intel_rapl: DRAM domain energy unit 15300pj
Console: switching to colour frame buffer device 128x48
ast 0000:07:00.0: fb0: astdrmfb frame buffer device
ast 0000:07:00.0: registered panic notifier
audit: type=1400 audit(1454950733.923:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=702 comm="apparmor_parser"
audit: type=1400 audit(1454950733.923:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=702 comm="apparmor_parser"
audit: type=1400 audit(1454950733.923:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=702 comm="apparmor_parser"
audit: type=1400 audit(1454950733.923:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=702 comm="apparmor_parser"
audit: type=1400 audit(1454950733.923:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=702 comm="apparmor_parser"
audit: type=1400 audit(1454950733.923:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=702 comm="apparmor_parser"
audit: type=1400 audit(1454950733.923:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=705 comm="apparmor_parser"
audit: type=1400 audit(1454950733.923:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=705 comm="apparmor_parser"
audit: type=1400 audit(1454950733.923:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=705 comm="apparmor_parser"
audit: type=1400 audit(1454950733.923:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=705 comm="apparmor_parser"
[drm] Initialized ast 0.1.0 20120228 for 0000:07:00.0 on minor 0
ipmi_si 00:05: Found new BMC (man_id: 0x002a7c, prod_id: 0x0834, dev_id: 0x20)
ipmi_si 00:05: IPMI kcs interface initialized
IPMI SSIF Interface driver
IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
igb 0000:04:00.0 em1: igb: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
init: failsafe main process (739) killed by TERM signal
aufs 3.x-rcN-20150105
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
init: plymouth-upstart-bridge main process ended, respawning
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
cgroup: systemd-logind (530) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
cgroup: "memory" requires setting use_hierarchy to 1 on the root
random: nonblocking pool is initialized
Adding 134101332k swap on /dev/sda2. Priority:-1 extents:1 across:134101332k SSFS
aufs au_opts_verify:1612:docker[1156]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1293]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethbcde426 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethbcde426: link is not ready
eth0: renamed from vethb815931
IPv6: ADDRCONF(NETDEV_CHANGE): vethbcde426: link becomes ready
docker0: port 1(vethbcde426) entered forwarding state
docker0: port 1(vethbcde426) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
docker0: port 1(vethbcde426) entered forwarding state
aufs au_opts_verify:1612:docker[1161]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1161]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth4182ded entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth4182ded: link is not ready
docker0: port 2(veth4182ded) entered disabled state
device veth4182ded left promiscuous mode
docker0: port 2(veth4182ded) entered disabled state
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1438]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth595b423 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth595b423: link is not ready
docker0: port 2(veth595b423) entered disabled state
device veth595b423 left promiscuous mode
docker0: port 2(veth595b423) entered disabled state
aufs au_opts_verify:1612:docker[1111]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1111]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethc0b41a4 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethc0b41a4: link is not ready
docker0: port 2(vethc0b41a4) entered forwarding state
docker0: port 2(vethc0b41a4) entered forwarding state
docker0: port 2(vethc0b41a4) entered disabled state
device vethc0b41a4 left promiscuous mode
docker0: port 2(vethc0b41a4) entered disabled state
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1111]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth339e165 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth339e165: link is not ready
docker0: port 2(veth339e165) entered forwarding state
docker0: port 2(veth339e165) entered forwarding state
docker0: port 2(veth339e165) entered disabled state
device veth339e165 left promiscuous mode
docker0: port 2(veth339e165) entered disabled state
aufs au_opts_verify:1612:docker[1111]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1111]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
device vetha7f0a53 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vetha7f0a53: link is not ready
docker0: port 2(vetha7f0a53) entered disabled state
device vetha7f0a53 left promiscuous mode
docker0: port 2(vetha7f0a53) entered disabled state
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1438]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethe0eb45d entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethe0eb45d: link is not ready
docker0: port 2(vethe0eb45d) entered disabled state
device vethe0eb45d left promiscuous mode
docker0: port 2(vethe0eb45d) entered disabled state
aufs au_opts_verify:1612:docker[1438]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1438]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethec861e3 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethec861e3: link is not ready
docker0: port 2(vethec861e3) entered disabled state
device vethec861e3 left promiscuous mode
docker0: port 2(vethec861e3) entered disabled state
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1438]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth4ad96b3 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth4ad96b3: link is not ready
docker0: port 2(veth4ad96b3) entered forwarding state
docker0: port 2(veth4ad96b3) entered forwarding state
docker0: port 2(veth4ad96b3) entered disabled state
device veth4ad96b3 left promiscuous mode
docker0: port 2(veth4ad96b3) entered disabled state
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth9e1349e entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth9e1349e: link is not ready
docker0: port 2(veth9e1349e) entered disabled state
device veth9e1349e left promiscuous mode
docker0: port 2(veth9e1349e) entered disabled state
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethac09e4f entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethac09e4f: link is not ready
docker0: port 2(vethac09e4f) entered disabled state
device vethac09e4f left promiscuous mode
docker0: port 2(vethac09e4f) entered disabled state
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethac84d11 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethac84d11: link is not ready
docker0: port 2(vethac84d11) entered forwarding state
docker0: port 2(vethac84d11) entered forwarding state
docker0: port 2(vethac84d11) entered disabled state
docker0: port 2(vethac84d11) entered disabled state
device vethac84d11 left promiscuous mode
docker0: port 2(vethac84d11) entered disabled state
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth0270399 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth0270399: link is not ready
docker0: port 2(veth0270399) entered disabled state
device veth0270399 left promiscuous mode
docker0: port 2(veth0270399) entered disabled state
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethabb725f entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethabb725f: link is not ready
docker0: port 2(vethabb725f) entered disabled state
device vethabb725f left promiscuous mode
docker0: port 2(vethabb725f) entered disabled state
aufs au_opts_verify:1612:docker[1438]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1438]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethd2230c9 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethd2230c9: link is not ready
docker0: port 2(vethd2230c9) entered disabled state
device vethd2230c9 left promiscuous mode
docker0: port 2(vethd2230c9) entered disabled state
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethade21d6 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethade21d6: link is not ready
docker0: port 2(vethade21d6) entered forwarding state
docker0: port 2(vethade21d6) entered forwarding state
docker0: port 2(vethade21d6) entered disabled state
device vethade21d6 left promiscuous mode
docker0: port 2(vethade21d6) entered disabled state
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1157]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth673f11d entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth673f11d: link is not ready
docker0: port 2(veth673f11d) entered disabled state
device veth673f11d left promiscuous mode
docker0: port 2(veth673f11d) entered disabled state
aufs au_opts_verify:1612:docker[1157]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1157]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethae9c651 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethae9c651: link is not ready
docker0: port 2(vethae9c651) entered disabled state
device vethae9c651 left promiscuous mode
docker0: port 2(vethae9c651) entered disabled state
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1157]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth3bc50f2 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth3bc50f2: link is not ready
docker0: port 2(veth3bc50f2) entered disabled state
device veth3bc50f2 left promiscuous mode
docker0: port 2(veth3bc50f2) entered disabled state
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1157]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethbaf8aba entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethbaf8aba: link is not ready
docker0: port 2(vethbaf8aba) entered forwarding state
docker0: port 2(vethbaf8aba) entered forwarding state
docker0: port 2(vethbaf8aba) entered disabled state
device vethbaf8aba left promiscuous mode
docker0: port 2(vethbaf8aba) entered disabled state
aufs au_opts_verify:1612:docker[1157]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1157]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth0ff451b entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth0ff451b: link is not ready
docker0: port 2(veth0ff451b) entered disabled state
device veth0ff451b left promiscuous mode
docker0: port 2(veth0ff451b) entered disabled state
aufs au_opts_verify:1612:docker[1157]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1157]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethb1723f8 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethb1723f8: link is not ready
docker0: port 2(vethb1723f8) entered forwarding state
docker0: port 2(vethb1723f8) entered forwarding state
docker0: port 2(vethb1723f8) entered disabled state
device vethb1723f8 left promiscuous mode
docker0: port 2(vethb1723f8) entered disabled state
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1157]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth057f790 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth057f790: link is not ready
docker0: port 2(veth057f790) entered disabled state
device veth057f790 left promiscuous mode
docker0: port 2(veth057f790) entered disabled state
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethdf0b0bb entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethdf0b0bb: link is not ready
docker0: port 2(vethdf0b0bb) entered disabled state
device vethdf0b0bb left promiscuous mode
docker0: port 2(vethdf0b0bb) entered disabled state
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth7c22589 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth7c22589: link is not ready
docker0: port 2(veth7c22589) entered disabled state
device veth7c22589 left promiscuous mode
docker0: port 2(veth7c22589) entered disabled state
aufs au_opts_verify:1612:docker[1036]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1157]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1438]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth5f73cc1 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth5f73cc1: link is not ready
docker0: port 2(veth5f73cc1) entered disabled state
device veth5f73cc1 left promiscuous mode
docker0: port 2(veth5f73cc1) entered disabled state
aufs au_opts_verify:1612:docker[1438]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1438]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1111]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth7436df1 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth7436df1: link is not ready
docker0: port 2(veth7436df1) entered forwarding state
docker0: port 2(veth7436df1) entered forwarding state
docker0: port 2(veth7436df1) entered disabled state
device veth7436df1 left promiscuous mode
docker0: port 2(veth7436df1) entered disabled state
aufs au_opts_verify:1612:docker[1438]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1438]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1156]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth4b714d5 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth4b714d5: link is not ready
docker0: port 2(veth4b714d5) entered disabled state
device veth4b714d5 left promiscuous mode
docker0: port 2(veth4b714d5) entered disabled state
aufs au_opts_verify:1612:docker[1156]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1156]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1438]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethc64f3a8 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethc64f3a8: link is not ready
docker0: port 2(vethc64f3a8) entered disabled state
device vethc64f3a8 left promiscuous mode
docker0: port 2(vethc64f3a8) entered disabled state
aufs au_opts_verify:1612:docker[1156]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1156]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
device vetha72cc08 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vetha72cc08: link is not ready
docker0: port 2(vetha72cc08) entered disabled state
device vetha72cc08 left promiscuous mode
docker0: port 2(vetha72cc08) entered disabled state
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1158]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1612:docker[1156]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth30d8d06 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth30d8d06: link is not ready
docker0: port 2(veth30d8d06) entered forwarding state
docker0: port 2(veth30d8d06) entered forwarding state
docker0: port 2(veth30d8d06) entered disabled state
device veth30d8d06 left promiscuous mode
docker0: port 2(veth30d8d06) entered disabled state
vethb815931: renamed from eth0
docker0: port 1(vethbcde426) entered disabled state
docker0: port 1(vethbcde426) entered disabled state
device vethbcde426 left promiscuous mode
docker0: port 1(vethbcde426) entered disabled state